![]() ![]() In this case, run the display io-packetfile command to check whether the corresponding software package of the board is loaded to the flash memory of the control board. Several minutes later, check whether the board is in the normal state. In this case, insert a board of the same type into the corresponding slot. The causes for the board failure are as follows: ![]() The board enters the configuration state after it is confirmed. The board can be used only after you run the board confirm command to confirm the board. If the version of the board software is different from that stored in the flash memory of the control board, the system automatically loads the software from the flash memory to the board. When a service board is inserted in a service slot, the board reports its version information to the system. The board is in the automatic loading state. You can query the board status to check whether the current status of the board is normal. This parameter is used to query the information about a board in a slot. This parameter is used to query the information about all boards in an entire subrack. To query the slot ID, name, status, daughter board information, port information, and online/offline state of the board after performing an operation on the board, run this command. This command is used to query the information about the boards in an entire subrack or the details of a specified board. ![]() To ensure that customers have basic understanding of Huawei MA5600T series board status, in this article we are going to introduce some configuration operations, mainly includes resetting and querying the control board, and adding, deleting, confirming and querying the service board. As Huawei OLT products, Huawei MA5600T series plays a big role in access network. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |